Heaters Switches / Control

The Solid State Relay Panel and Zone Analog Controller (with or without optional timer) work together, and are project specificA licensed electrician is required to verify voltage and available amperagePlease contact us for more informationInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. The Solid State Relay Panel and Zone Analog Controller (with or without optional timer) work together, and are project specific. Please contact us for more information. Please note that a licensed electrician is required to verify voltage and available amperage. These surface mount panels and relays are designed to provide efficient operation for spaces that range from upscale residences to large-scale commercial properties with multiple heating zones. Relay Panels are energy efficient and boast timer functions, control versatility, and ease of use. With a panel you have the ability to adjust heating intensity and achieve the ideal comfort for your space. You also have the capability to control one or more heaters to heat specified target areas within a large-scale space. Electrical wiring diagrams can be provided from Infratech for each installation. Again, we are happy to help with any and all questions.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number30 4056

The Solid State Relay Panel and Zone Analog Controller (with or without optional timer) must be used together, and are project specificA licensed electrician is required to verify voltage and available amperagePlease contact us for more informationSolid State Relay Panels are sold separatelyInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. The Solid State Relay Panel and Zone Analog Controller (with or without optional timer) work together, and are project specific. Please contact us for more information. Please note that a licensed electrician is required to verify voltage and available amperage. These surface mount panels and relays are designed to provide efficient operation for spaces that range from upscale residences to large-scale commercial properties with multiple heating zones. Relay Panels are energy efficient and boast timer functions, control versatility, and ease of use. With a panel you have the ability to adjust heating intensity and achieve the ideal comfort for your space. You also have the capability to control one or more heaters to heat specified target areas within a large-scale space. Electrical wiring diagrams can be provided from Infratech for each installation. Again, we are happy to help with any and all questions.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number30 4048

The Solid State Relay Panel and Zone Analog Controller (with or without optional timer) must be used together, and are project specificA licensed electrician is required to verify voltage and available amperagePlease contact us for more informationSolid State Relay Panels are sold separatelyInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. The Solid State Relay Panel and Zone Analog Controller (with or without optional timer) work together, and are project specific. Please contact us for more information. Please note that a licensed electrician is required to verify voltage and available amperage. These surface mount panels and relays are designed to provide efficient operation for spaces that range from upscale residences to large-scale commercial properties with multiple heating zones. Relay Panels are energy efficient and boast timer functions, control versatility, and ease of use. With a panel you have the ability to adjust heating intensity and achieve the ideal comfort for your space. You also have the capability to control one or more heaters to heat specified target areas within a large-scale space. Electrical wiring diagrams can be provided from Infratech for each installation. Again, we are happy to help with any and all questions.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number30 4045

Ideal for controlling single element heaters such as the Infratech W-Series and Slimline SeriesControl offers maximum energy efficiencyOn/Off switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Simply flip a switch with the On/Off Wall Plate Switch. Ideal for controlling single element heaters such as the W-Series and Slimline Series, this dual surface mount switch is a simple, low cost control option that boasts easy installation and use. Other Infratech control options include a duplex switch option for the dual element WD-Series and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage of your heater and controls.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4425

Ideal for controlling single element heaters such as the Infratech W-Series and Slimline SeriesControl offers maximum energy efficiencyOn/Off switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Simply flip a switch with the On/Off Wall Plate Switch. Ideal for controlling single element heaters such as the W-Series and Slimline Series, this single surface mount switch is a simple, low cost control option that boasts easy installation and use. Other Infratech control options include a duplex switch option for the dual element WD-Series and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage of your heater and controls.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4420

Ideal for controlling single element heaters such as the Infratech W-Series and Slimline SeriesControl offers maximum energy efficiencyOn/Off switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Simply flip a switch with the On/Off Wall Plate Switch. Ideal for controlling single element heaters such as the W-Series and Slimline Series, this dual flush mount switch is a simple, low cost control option that boasts easy installation and use. Other Infratech control options include a duplex switch option for the dual element WD-Series and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage of your heater and controls.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4415

Ideal for controlling single element heaters such as the Infratech W-Series and Slimline SeriesControl offers maximum energy efficiencyOn/Off switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Simply flip a switch with the On/Off Wall Plate Switch. Ideal for controlling single element heaters such as the W-Series and Slimline Series, this single flush mount switch is a simple, low cost control option that boasts easy installation and use. Other Infratech control options include a duplex switch option for the dual element WD-Series and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage of your heater and controls.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4410

Ideal for controlling single element heaters such as the Infratech W-Series and Slimline SeriesControl offers maximum energy efficiencyOn/Off switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Simply flip a switch with the On/Off Wall Plate Switch. Ideal for controlling single element heaters such as the W-Series and Slimline Series, this dual wall plate switch is a simple, low cost control option that boasts easy installation and use. Other Infratech control options include a duplex switch option for the dual element WD-Series and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage of your heater and controls.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4405

Ideal for controlling single element heaters such as the Infratech W-Series and Slimline SeriesControl offers maximum energy efficiencyOn/Off switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Simply flip a switch with the On/Off Wall Plate Switch. Ideal for controlling single element heaters such as the W-Series and Slimline Series, this single wall plate switch is a simple, low cost control option that boasts easy installation and use. Other Infratech control options include a duplex switch option for the dual element WD-Series and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage of your heater and controls.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4400

Regulator cycles the heater on/off at regular intervals when not on full powerIdeal for controlling single element heaters of up to 3000 watts such as the W-Series and Slimline SeriesThis is the switch only, this does not include gang box or coverInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Not to be confused with a dimmer, the INF input regulator gently cycles the heater on/off at regular intervals when your heater is not on full power. Ideal for controlling single element heaters of up to 3000 watts such as the W-Series and Slimline Series, this 240V unit is a switch only, the gang box is not included. Other Infratech control options include simple on/off switches for all models and a duplex switch option for the dual element WD-Series. Please note that a licensed electrician is required to verify voltage and available amperage.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel NumberINF20

Regulator cycles the heater on/off at regular intervals when not on full powerIdeal for controlling single element heaters of up to 3000 watts such as the W-Series and Slimline SeriesThis is the switch only, this does not include gang box or coverInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Not to be confused with a dimmer, the INF input regulator gently cycles the heater on/off at regular intervals when your heater is not on full power. Ideal for controlling single element heaters of up to 3000 watts such as the W-Series and Slimline Series, this 120V unit is a switch only, the gang box is not included. Other Infratech control options include simple on/off switches for all models and a duplex switch option for the dual element WD-Series. Please note that a licensed electrician is required to verify voltage and available amperage.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel NumberINF10

Duplex switch gives the ability to turn each element on and offIdeal for controlling dual element heaters such as the Infratech WD-SeriesDuplex switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Ideal for controlling dual element heaters such as the WD-Series, this surface mount weatherproof single switch offers user-friendly operation that is compatible with any budget. The duplex switch features in-wall or surface mount options, and is available with or without weatherproof covers. With this control you have the ability to turn on and off each element independently, effectively providing half power or full power capabilities. Other Infratech control options include simple on/off switches for all models and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4320

Duplex switch gives the ability to turn each element on and offIdeal for controlling dual element heaters such as the Infratech WD-SeriesDuplex switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Ideal for controlling dual element heaters such as the WD-Series, this in-wall weatherproof single switch offers user-friendly operation that is compatible with any budget. The duplex switch features in-wall or surface mount options, and is available with or without weatherproof covers. With this control you have the ability to turn on and off each element independently, effectively providing half power or full power capabilities. Other Infratech control options include simple on/off switches for all models and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4310

Duplex switch gives the ability to turn each element on and offIdeal for controlling dual element heaters such as the Infratech WD-SeriesDuplex switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Ideal for controlling dual element heaters such as the WD-Series, this surface mount weatherproof dual switch offers user-friendly operation that is compatible with any budget. The duplex switch features in-wall or surface mount options, and is available with or without weatherproof covers. With this control you have the ability to turn on and off each element independently, effectively providing half power or full power capabilities. Other Infratech control options include simple on/off switches for all models and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4325

Duplex switch gives the ability to turn each element on and offIdeal for controlling dual element heaters such as the Infratech WD-SeriesDuplex switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Ideal for controlling dual element heaters such as the WD-Series, this in-wall dual switch offers user-friendly operation that is compatible with any budget. The duplex switch features in-wall or surface mount options, and is available with or without weatherproof covers. With this control you have the ability to turn on and off each element independently, effectively providing half power or full power capabilities. Other Infratech control options include simple on/off switches for all models and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4305

Duplex switch gives the ability to turn each element on and offIdeal for controlling dual element heaters such as the Infratech WD-SeriesDuplex switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Ideal for controlling dual element heaters such as the WD-Series, this in-wall weatherproof dual switch offers user-friendly operation that is compatible with any budget. The duplex switch features in-wall or surface mount options, and is available with or without weatherproof covers. With this control you have the ability to turn on and off each element independently, effectively providing half power or full power capabilities. Other Infratech control options include simple on/off switches for all models and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4315

Duplex switch gives the ability to turn each element on and offIdeal for controlling dual element heaters such as the Infratech WD-SeriesDuplex switch features in-wall or surface mount options, and is available with or without weatherproof coversFor use with 120V up to 277V heatersMade in the USAInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Ideal for controlling dual element heaters such as the WD-Series, this in-wall single switch offers user-friendly operation that is compatible with any budget. The duplex switch features in-wall or surface mount options, and is available with or without weatherproof covers. With this control you have the ability to turn on and off each element independently, effectively providing half power or full power capabilities. Other Infratech control options include simple on/off switches for all models and an input regulator for the single element W-Series and Slimline Series. Please note that a licensed electrician is required to verify voltage and available amperage.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4300

Regulator cycles the heater on/off at regular intervals when not on full powerIdeal for controlling single element heaters of up to 3000 watts such as the W-Series and Slimline SeriesSwitch features in-wall and surface mount options, and is available with or without weatherproof coversFor use with 240V heaters onlyInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Not to be confused with a dimmer, the INF input regulator gently cycles the heater on/off at regular intervals when your heater is not on full power. Ideal for controlling single element heaters of up to 3000 watts such as the W-Series and Slimline Series, this 240V dual wall plate, gang box, and weatherproof switch is a low cost control option that is has in-wall and surface mount options, and is available with or without weatherproof covers. Other Infratech control options include simple on/off switches for all models and a duplex switch option for the dual element WD-Series. Please note that a licensed electrician is required to verify voltage and available amperage.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4225

Regulator cycles the heater on/off at regular intervals when not on full powerIdeal for controlling single element heaters of up to 3000 watts such as the W-Series and Slimline SeriesSwitch features in-wall and surface mount options, and is available with or without weatherproof coversFor use with 120V heaters onlyInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Not to be confused with a dimmer, the INF input regulator gently cycles the heater on/off at regular intervals when your heater is not on full power. Ideal for controlling single element heaters of up to 3000 watts such as the W-Series and Slimline Series, this 120V dual wall plate, gang box, and weatherproof switch is a low cost control option that is has in-wall and surface mount options, and is available with or without weatherproof covers. Other Infratech control options include simple on/off switches for all models and a duplex switch option for the dual element WD-Series. Please note that a licensed electrician is required to verify voltage and available amperage.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4125

Regulator cycles the heater on/off at regular intervals when not on full powerIdeal for controlling single element heaters of up to 3000 watts such as the W-Series and Slimline SeriesSwitch features in-wall and surface mount options, and is available with or without weatherproof coversFor use with 240V heaters onlyInfratech offers a variety of control options for maximum energy efficiency, control versatility, ease of use and affordability. Not to be confused with a dimmer, the INF input regulator gently cycles the heater on/off at regular intervals when your heater is not on full power. Ideal for controlling single element heaters of up to 3000 watts such as the W-Series and Slimline Series, this 240V single wall plate, gang box, and weatherproof switch is a low cost control option that is has in-wall and surface mount options, and is available with or without weatherproof covers. Other Infratech control options include simple on/off switches for all models and a duplex switch option for the dual element WD-Series. Please note that a licensed electrician is required to verify voltage and available amperage.Legal disclaimers and warnings Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm. Product InformationModel Number14 4220