Lighting

Our professional grade B106 LED low voltage landscape Accent Lights are constructed from a heavy-duty solid die-cast brass and have a gasket ring seal to prevent water from entering the fixture. The fixture is built with a beryllium copper socket housing, an PAR36 LED Lamp, clear heat-resistant glass, a drainage notch on the shield, thumb nut on knuckle for easy adjustment, a locknut, and a heavy-duty 8″ ground stake. This fixture is perfect for highlighting roof peaks, flagpoles, and large trees above 30′. The B106 with the PAR36 120° LED Lamp will provide a wider light beam spread compared to our other Accent Lights. Model #: TS-B106 (Available in Black or Bronze) Lighting Specifications: Construction: Die-cast Brass Finish: Black Powder Coat or Antique Brushed Bronze Light Source (included): PAR36 LED Lamp Light Beam: 120° Watts: 8W Lumens: 435L Color Temp (CCT): 2700K Voltage Range: 9v – 15v AC/DC Lens: Clear Flat Heat Resistant Glass Mounting: 8” Heavy-duty Stake with cut out for wire Lead Wire: 36” (Standard) 18AWG, SPT-1W black waterproof wire Power Supply: 12V Low Voltage Transformer (Sold Separately)    

Our professional grade B105 LED low voltage landscape Accent Lights have the widest beam spread angle of our accent lights. These accent lights are constructed from a heavy-duty solid die-cast brass and have a gasket ring seal to prevent water from entering the fixture. The fixture is built with a beryllium copper socket housing, an MR16 LED Lamp, frosted heat-resistant glass, a drainage notch on the shield, thumb nut on knuckle for easy adjustment, a locknut, and a heavy-duty 8″ ground stake. This fixture is perfect for canopy trees under 20′, wall wash lighting, or fountains. The B105 with the MR16 60° LED Lamp will provide a wider light beam spread compared to our other Accent Lights. Model #: TS-B105  Lighting Specifications: Construction: Die-cast Brass Finish: Black Powder Coated or Antique Brushed Bronze Light Source (included): MR16 LED Lamp Light Beam: 60° Lumens: 383L Watts: 5W Color Temp (CCT): 2700K Voltage Range: 9v – 15v AC/DC Lens: Frosted Flat Heat Resistant Glass Mounting: 8” Heavy-duty Stake with cut out for wire Lead Wire: 36” (Standard) 18AWG, SPT-1W black waterproof wire Power Supply: 12V Low Voltage Transformer (Sold Separately) For full product specifications, please click here.  

Our professional grade B105 LED low voltage landscape Accent Lights have the widest beam spread angle of our accent lights. These accent lights are constructed from a heavy-duty solid die-cast brass and have a gasket ring seal to prevent water from entering the fixture. The fixture is built with a beryllium copper socket housing, an MR16 LED Lamp, frosted heat-resistant glass, a drainage notch on the shield, thumb nut on knuckle for easy adjustment, a locknut, and a heavy-duty 8″ ground stake. This fixture is perfect for canopy trees under 20′, wall wash lighting, or fountains. The B105 with the MR16 60° LED Lamp will provide a wider light beam spread compared to our other Accent Lights. Model #: TS-B105  Lighting Specifications: Construction: Die-cast Brass Finish: Black Powder Coated or Antique Brushed Bronze Light Source (included): MR16 LED Lamp Light Beam: 60° Lumens: 383L Watts: 5W Color Temp (CCT): 2700K Voltage Range: 9v – 15v AC/DC Lens: Frosted Flat Heat Resistant Glass Mounting: 8” Heavy-duty Stake with cut out for wire Lead Wire: 36” (Standard) 18AWG, SPT-1W black waterproof wire Power Supply: 12V Low Voltage Transformer (Sold Separately) For full product specifications, please click here.  

Known as, “The Workhorse of The Industry” — our professional grade B102 LED low voltage landscape accent lights are constructed from heavy-duty solid die-cast brass and have a double “O” ring seal to prevent water from entering the fixture. These are the most common accent light used. The fixture is built with a beryllium copper socket housing, an MR16 LED lamp, heat resistant glass, a drainage notch on the shield, thumb nut on knuckle for easy adjustment, a locknut, and a heavy-duty 8″ ground stake. This fixture is the perfect all-around accent light for highlighting structures, focal point plants, trees, or to light up a wall, statue or fountain. Twist and pull off the shield to easily install or change MR16 LED lamp by hand. Model #: TS-B102 

Known as, “The Workhorse of The Industry” — our professional grade B102 LED low voltage landscape accent lights are constructed from heavy-duty solid die-cast brass and have a double “O” ring seal to prevent water from entering the fixture. These are the most common accent light used. The fixture is built with a beryllium copper socket housing, an MR16 LED lamp, heat resistant glass, a drainage notch on the shield, thumb nut on knuckle for easy adjustment, a locknut, and a heavy-duty 8″ ground stake. This fixture is the perfect all-around accent light for highlighting structures, focal point plants, trees, or to light up a wall, statue or fountain. Twist and pull off the shield to easily install or change MR16 LED lamp by hand. Model #: TS-B102 

Upgrade existing fixtures using a Color Changing RGBCW MR16 lamp. This will enable you to have full control through our Tru-Scapes app over the color and brightness of the display. Model #: TS-40MR16-C (Color Changing Lamp) Lighting Specifications: MR16 RGBCW Lamp Lumens: 420L Voltage Range: 9v – 15v AC/DC Watts: 8W Light beam angle: 40º RGBCW—When set at 2700K (the light is 5W & 470LM)  

Our most popular color changing replacement lamp to be used with a variety of Tru-Scapes® fixtures. This is the perfect replacement lamp to enable color changing capability on your lighting system. Model #: TS-360G4-C

Our NEW 2700K warm white in-ground TS-15DOT Stainless Steel Modern series Low Voltage LED Dot Lights are designed with a fully sealed housing and a frosted acrylic lens. TS-15DOT-BRZ

Replacement LED Color Changing Lamp for TS-A6000- TSA6000-RLMP-C

Our NEW in-ground TS-25DOT Bronze Traditional series Low Voltage LED Dot Lights are designed with a fully sealed housing and a frosted acrylic lens. TS-25DOT-BRZ

Our NEW in-ground (easily installed with a 2″ core drill bit) app controlled Color Changing TS-25DOTC Bronze Traditional series Low Voltage LED Dot Lights are designed with the ability to adjust color temperature (warm to cool), RGB color output, dimming, and grouping of fixtures. The Traditional Dot Light is easily installed in concrete, driveways, stone, wood, or composite decking with a 2″ core drill bit. TS-25DOTC-BRZ

Our NEW 4000K cool white in-ground TS-M15DOT-SS Stainless Steel Modern series Low Voltage LED Dot Lights are designed with a fully sealed housing and a frosted acrylic lens. Modern Dot Light—TS-M15DOT-SS

Our professional-grade TS-MHPL-6 6″ Low Voltage LED Paver Lights are 4000K Cool White and designed with an aluminum fixture and a frosted acrylic lens to protect the LEDs. These lights sit flush with the ground to highlight patio areas, walkways, and driveways. Tru-Scapes® paver lights are installed in the sailor or soldier course of your paver project. Modern-6″ Paver Light—TS-MHPL-6

Our professional-grade TS-MHPL-8 8″ Low Voltage LED Paver Lights are 4000K Cool White and designed with an aluminum fixture and a frosted acrylic lens to protect the LEDs. These lights sit flush with the ground to highlight patio areas, walkways, and driveways. Tru-Scapes® paver lights are installed in the sailor or soldier course of your paver project. Modern-8″ Paver Light—TS-MHPL-8

Our professional-grade TS-MHPL-9 9″ Low Voltage LED Paver Lights are 4000K Cool White and designed with an aluminum fixture and a frosted acrylic lens to protect the LEDs. These lights sit flush with the ground to highlight patio areas, walkways, and driveways. Tru-Scapes® paver lights are installed in the sailor or soldier course of your paver project. Modern-9″ Paver Light—TS-MHPL-9

Our professional-grade TS-HPL-6 6″ Low Voltage LED Paver Lights are 2700K Warm White and designed with an aluminum fixture and a frosted acrylic lens to protect the LEDs. These lights sit flush with the ground to highlight patio areas, walkways, and driveways. Tru-Scapes® paver lights are installed in the sailor or soldier course of your paver project. 6″ Paver Light—TS-HPL-6

Our professional-grade TS-HPL-8 8″ Low Voltage LED Paver Lights are 2700K Cool White and designed with an aluminum fixture and a frosted acrylic lens to protect the LEDs. These lights sit flush with the ground to highlight patio areas, walkways, and driveways. Tru-Scapes® paver lights are installed in the sailor or soldier course of your paver project. 8″ Paver Light—TS-HPL-8

Our professional-grade TS-HPL-9 9″ Low Voltage LED Paver Lights are 2700K Cool White and designed with an aluminum fixture and a frosted acrylic lens to protect the LEDs. These lights sit flush with the ground to highlight patio areas, walkways, and driveways. Tru-Scapes® paver lights are installed in the sailor or soldier course of your paver project. 9″ Paver Light—TS-HPL-9

This is the perfect low-profile hardscape light. Accent all your walls and columns with this fully replaceable hardscape light. Traditional Hardscape Light—TS-A6000

This is the perfect low-profile hardscape light. Accent all your walls and columns with this fully replaceable hardscape light. Traditional Hardscape Light—TS-A6000-BRZ